1. The sheet must be protected from moisture and collision during transportation.

2. When the sheets are stored, it is prohibited to place liquid items (such as drinks, boiled water, etc.) on the sheets.

3. Avoid direct contact between hands and sheets during operation, so wear gloves.

4. If it is not used up, the remaining parts must be wrapped with wrapping film and placed in a dry place. If possible, they can be stored in a warehouse with a constant temperature and a relative humidity below 50%.

5. Rolling is strictly prohibited during sheet handling.

6. If an air compressor is used for feeding, the gas must be kept dry.

7. The arm of the feeder must maintain uniform tension.

8. If the stamped finished products cannot be shipped in a short time, they shall be stored in a closed container and desiccant shall be placed.